I have conflicting feelings about Netatmo’s $300 Presence outdoor security camera and LED light fixture.
The good stuff: It’s a highly capable 1080p live video streamer with advanced analytics that correctly labeled motion activity as a car, a person or an animal most of the time. Its internal 16GB microSD card makes event-based video recording a breeze.The not-so-good stuff: The Presence is really expensive and Netatmo went bold with its design — if you don’t fancy the modern aesthetic, you won’t like the way it looks. It’s also light on smart home partners, only featuring support for online connection service IFTTT at launch.
While I’m nearly sold on the Presence’s motion capabilities, I’m just not ready to drop 300 bucks on a single outdoor security camera — especially if it doesn’t have much overlap with the broader smart home market. Its design wouldn’t work with my more traditional-looking home, either.
If the price and strong design don’t scare you off, Netatmo’s Presence could work for you. I’d take a look at some other options before you buy, though.
Like the $200 Kuna Light Fixture, Netatmo’s Presence pulls double duty as both a security camera and a floodlight. Weatherproofed and rated for outdoor use, this heavy, rectangular hybrid device has to be hardwired to work properly. As always, be sure to reach out to a professional electrician if you have any questions.
The easiest install method is to ditch one of your existing outdoor wall lights and replace it with a Presence. For the 100-degree field of view Presence camera to work optimally, I’d only install it where you’d typically put a porch light and leave any security lights far above eye level alone.
If you’re familiar with this type of install, it should be fairly simple, but it works best with two people; you need someone to hold the camera and someone else to connect the wires. Netatmo provides a wire terminal so you can more easily connect everything, but the ports were much too small to fit the larger wires we had at the CNET Smart Home. So, I had to remove the wire terminal and use wire nuts to connect everything instead.
I ran into an issue with the length of the wires here — they’re extremely short and it was difficult to connect the wire nuts and tuck them into the terminal box without everything disconnecting. Eventually, I called for reinforcements and our technical editor, Steve Conaway, got everything connected in about 30 minutes. If you include my initial effort, the total time spent on the Presence install was close to an hour and a half.
Once the Presence is installed, download the related Netatmo Security Android or iPhone app. Create an account and follow the step-by-step tutorial to pair the camera. Assuming everything is installed correctly, the app will scan for the camera, ask you to connect to the local Wi-Fi network and name your camera — then you’re ready to start live streaming.